5" X50FT Wire Mesh Knitted Wildlife Stopper For DIY Hole Distiling

Wire mesh knitted Introduction

Wire mesh knitted is Pure Copper, not Copper Alloy, It’s a soft and flexible pure copper mesh cloth. Copper mesh repels with a natural charge Manufactured in flattened copper wire for added copper surface area and increased deterrent levels

Wire mesh knitted specifications

Wire Mesh Knitted Application

1. Copper mesh for Wildlife Stopper

Copper mesh for wildlife stopper can control the animal ,for example snake ,rodent ,the most important is give you a security environment ,at the same time keep green ,because it is Rohs material .

2. Copper mesh for weeping hole 

Copper mesh for weeping hole,because of the copper color the same as roof ,so after fill into the mesh ,you will like it very much 

3. Copper mesh for screw cleaning.

Steps to clean the screws and barrels efficiently with copper gauze and grease.

Step 1: Use a purging compound to clean the extruder. Then use small ball of copper mesh with some silicone grease on it to clean the die face. Also please clean the valve when it is still hot.

Step 2: Remove the die from the extruder head. It is best to clean it by silicone coated copper gauze forced through the die with a wooden dowel.

Step 3: Pull back and forth the copper gauze to complete the cleaning after it pass through the die.

Step 4: Make sure that no residual trace of adhered plastic is left, nor causing a scratch on the metal surface, so the die is thoroughly clean.

Step 5: Remove the hot screw partly, wrap the copper gauze with silicone coating 3 times around the screw, pull back and forth to do the cleaning.

Step 6: Keep sliding the copper gauze when removing the screw out of barrel slowly, until the screw is clean. It takes only 5 minutes for step 5 and 6 operations.

Step 7: Wrap copper mesh at end of a long rod and pass it through the barrel. Then, chuck the rod into power drill, insert fresh gauze and pass back and forth through barrel until clean.

Step 8: Please do all the operations with silicone grease coated copper mesh. Now all parts is clean and ready for reassemble.

4.Shielding electromagnetic interference to ensure normal operation of instruments and equipment and prevent electromagnetic leakage:

Useful shielding to suppress electromagnetic signals passing through flashing windows

Copper Knitted Wire Mesh advantages

Copper has good electrical conductivity, thermal conductivity, corrosion resistance and ductility and other physical and chemical properties.Electrical and thermal conductivity is second only to silver, pure copper can be drawn into very fine copper wire, made into very thin copper foil.The fresh cross section of pure copper is rose-red, but after the formation of copper oxide film on the surface, the appearance is purplish red, so it is often called copper.